FREE SHIPPING ON ALL EMBERS ORDERS · USE CODE FREESHIP30 AT CHECKOUT · ENDS DEC 16
LIGHT IT. BUILD IT. ENJOY IT.
THE FIRESIDE JOURNAL

GOOD FIRES. GREAT STORIES.

Simple, useful reading for your next fireplace evening, backyard fire or camping trip.

FIRE STARTING · 4 MIN READ

HOW TO START A FIRE WITHOUT LIGHTER FLUID

Skip liquid accelerants. Choose an approved fire area, dry kindling and appropriately sized firewood. Arrange the wood to allow airflow, place a fire starter according to its package instructions and light from a safe position. Add larger wood only after smaller pieces have caught.

Embers Fire Starters are designed to provide an initial flame for approximately 6–8 minutes, depending on conditions. Never add fire starters to an active flame.

See the fire-building layouts →
FIREWOOD · 5 MIN READ

WHAT'S THE BEST FIREWOOD FOR A HOME FIREPLACE?

Seasoned hardwood is often a practical choice for a longer burn and lasting coals, but the most important starting point is clean, dry fuel suitable for your appliance. Aim for about 20% moisture or less, check your chimney and avoid treated or painted lumber.

Read the full firewood guide →
OUTDOORS · 4 MIN READ

HOW TO BUILD A CAMPFIRE THAT LASTS

Start with an approved fire ring and check current restrictions. Build a small, ventilated structure with dry kindling, then gradually add larger wood. Teepee and log-cabin methods are useful starting points. Keep water nearby and fully extinguish the fire before leaving.

Explore four fire-building methods →
HOME SAFETY · 3 MIN READ

YOUR BEFORE-YOU-LIGHT FIREPLACE CHECKLIST

Confirm your chimney and fireplace are in good working order, open the damper where required, keep combustibles away, use a screen and verify that smoke and carbon monoxide alarms work. Have a plan for cooling and disposing of ashes safely.

Review the fire safety guide →

KEEP THE FIRE GOING.

EXPLORE ALL GUIDES →SHOP EMBERS →